Uses of Class
java.lang.Object

Packages that use Object

com.sun.spot.interisolate	Generic support for RPC mechanisms between isolates.
com.sun.spot.io.j2me.memory	Support for the "memory" GCF protocol.
com.sun.spot.io.j2me.radiogram
com.sun.spot.io.j2me.radiostream
com.sun.spot.io.j2me.remoteprinting	Provides the auxiliary classes used by remote printing.
com.sun.spot.io.j2me.socket	Support for the "socket" GCF protocol.
com.sun.spot.networktools
com.sun.spot.peripheral	Access to the hardware peripherals built in to the Sun SPOT main board.
com.sun.spot.peripheral.basestation	Code to allow the Sun SPOT to function as a base station.
com.sun.spot.peripheral.driver.proxy	Allows child isolates access to the driver registry maintained in the master isolate.
com.sun.spot.peripheral.external	Generic support for external boards.
com.sun.spot.peripheral.handler	Handlers for control button events.
com.sun.spot.peripheral.ota	Support for managing remote Sun SPOTs using ant scripts.
com.sun.spot.peripheral.radio	Support for using the Sun SPOT's radio.
com.sun.spot.peripheral.radio.mhrp
com.sun.spot.peripheral.radio.mhrp.aodv
com.sun.spot.peripheral.radio.mhrp.aodv.messages
com.sun.spot.peripheral.radio.mhrp.aodv.request
com.sun.spot.peripheral.radio.mhrp.aodv.routing
com.sun.spot.peripheral.radio.mhrp.interfaces
com.sun.spot.peripheral.radio.policy.proxy
com.sun.spot.peripheral.radio.proxy	Allows child isolates access to the radio controlled by the master isolate.
com.sun.spot.resourcesharing
com.sun.spot.sensorboard	Contains highest level interfaces and concrete classes that make up the SunSPOT sensorboard libraries.
com.sun.spot.sensorboard.hardware	Interfaces and concrete classes that embody various pieces of hardware that are built into the SunSPOT sensorboards.
com.sun.spot.sensorboard.io	Interfaces and concrete implmentations of classes to enable simple low-level i/o to and from the SunSPOT sensorboards.
com.sun.spot.sensorboard.peripheral	Interfaces and concrete implementations of various peripherals that are either connected to or built into the daughter cards.
com.sun.spot.sensorboard.protocol	Collection of some simple classes that define external protocols that can be attached to SunSPOT daughtercards.
com.sun.spot.sensorboard.util	Collection of utility classes to deal with the SunSPOT sensorboards.
com.sun.spot.testFramework	Provides a limited equivalent to jUnit for use on Sun SPOTs.
com.sun.spot.util	Utility classes.
com.sun.squawk
com.sun.squawk.flash
com.sun.squawk.imp
com.sun.squawk.io
com.sun.squawk.io.j2me.radio
com.sun.squawk.io.mailboxes
com.sun.squawk.peripheral
com.sun.squawk.security
com.sun.squawk.security.verifier
com.sun.squawk.util
com.sun.squawk.vm
java.io
java.lang
java.lang.ref
java.util
javax.microedition.io
javax.microedition.midlet
javax.microedition.rms
junit.framework	Support classes for the test framework.

Uses of Object in com.sun.spot.interisolate

Subclasses of Object in com.sun.spot.interisolate

class	BooleanReplyEnvelope
class	ExceptionReplyEnvelope
class	InterIsolateServer The purpose of classes in this package is to provide a generic framework for building remote-procedure-call (RPC) mechanisms between isolates.
class	NumberReplyEnvelope
class	ObjectReplyEnvelope
class	ReplyEnvelope
class	RequestEnvelope
class	RequestSender
class	VoidReplyEnvelope

Methods in com.sun.spot.interisolate that return Object

Object	VoidReplyEnvelope.getContents()
Object	RequestEnvelope.getContents()
Object	ObjectReplyEnvelope.getContents()
Object	NumberReplyEnvelope.getContents()
Object	ExceptionReplyEnvelope.getContents()
Object	BooleanReplyEnvelope.getContents()

Methods in com.sun.spot.interisolate with parameters of type Object

abstract ReplyEnvelope	RequestEnvelope.execute(Object context)
static void	InterIsolateServer.run(String channelName, Object context)
static void	InterIsolateServer.run(String channelName, Object context, int threadPriority)

Constructors in com.sun.spot.interisolate with parameters of type Object

ObjectReplyEnvelope(int requestUid, Object contents)

Uses of Object in com.sun.spot.io.j2me.memory

Subclasses of Object in com.sun.spot.io.j2me.memory

class

MemoryInputStream An InputStream that streams over the device memory.

Uses of Object in com.sun.spot.io.j2me.radiogram

Subclasses of Object in com.sun.spot.io.j2me.radiogram

class	Radiogram Helper class for "radiogram:" connections.
class	RadiogramConnImpl This class provides the "radiogram" protocol for accessing the SPOT radio using datagrams.

Uses of Object in com.sun.spot.io.j2me.radiostream

Subclasses of Object in com.sun.spot.io.j2me.radiostream

class	RadioInputStream Helper class for "radiostream:" connections.
class	RadioOutputStream Helper class for "radiostream:" connections.

Uses of Object in com.sun.spot.io.j2me.remoteprinting

Subclasses of Object in com.sun.spot.io.j2me.remoteprinting

class	RemotePrintManager Manages the creation and removal of remote print connections
class	RemotePrintOutputStream Helper class for "remoteprint:" connections.

Uses of Object in com.sun.spot.io.j2me.socket

Subclasses of Object in com.sun.spot.io.j2me.socket

class	ProxyInitializer Handles the string used to initialize a connection between a SocketConnection and the socket proxy on the host.
class	SocketConnection This class provides the necessary implementation for a socket connection.
class	SocketProtocolInputStream Socket specific InputSteam.
class	SocketProtocolOutputStream Socket specific InputSteam.

Uses of Object in com.sun.spot.networktools

Subclasses of Object in com.sun.spot.networktools

class

TraceRouteServer A daemon that responds to trace route requests with routing info

Uses of Object in com.sun.spot.peripheral

Subclasses of Object in com.sun.spot.peripheral

class	BoundedInputStream Wraps a parent InputStream with an input stream on the assumptions that the first four bytes of the parent's content are a Java int which tells us how many more valid bytes remain in the parent.
class	BoundedOutputStream An output stream that writes the length of the data at the start.
class	CC2420Driver
class	ChannelBusyException Thrown when an attempt to transmit over the radio fails because the channel is busy - and remains busy for a full set of retries.
class	ConfigPage Each Spot reserves some flash memory for configuration information.
class	DriverRegistry Acts as a registry for drivers that need to be aware of deep sleep.
class	FiqInterruptDaemon
class	FlashInputStream An InputStream that streams over flash memory.
class	FlashOutputStream An OutputStream that streams over flash memory.
class	NoAckException Thrown when an attempt to transmit over the radio fails because no acknowledgement is received within the time limit specified in the I802.15.4 standard.
class	NorFlashSector Define a segment of memory which is defined as being of type NOR Flash.
class	NoRouteException
class	PeripheralChipSelect
class	PIOPin A PIOPin is a convenient way of manipulating an individual PIO pin.
class	RadioConnectionBase Abstract base class for classes that implement a radio Connection that can time out if an expected acknowledgment doesn't arrive for a sent packet.
class	SpiPcs
class	Spot The class of the root object of the Spot base library.
class	SpotFatalException This class represents all API precondition violations by client programs.
class	TimeoutException Thrown when an attempt to receive data over either a "radiostream:" or "radiogram:" connection fails due to a read timeout being exceeded.
class	UnableToDeepSleepException This exception is thrown when an attempt to ensure a deep sleep fails because deep sleep is impossible.

Uses of Object in com.sun.spot.peripheral.basestation

Subclasses of Object in com.sun.spot.peripheral.basestation

class	BaseStation This class implements a base station that allows a PC (the "host") to communicate to a standalone Spot ("the target") through a second Spot (the "base station") connected to the host via a test board and usb cable.
class	GetChannelAccessFailureCommand
class	GetNoAckCommand
class	GetNullPacketAfterAckWaitCommand
class	GetPLMETransmitCommand
class	GetWrongAckCommand
class	MACCommand
class	MACProxyServer
class	MACProxyServer.LedManager
class	MCPSDataIndicationCommand
class	MCPSDataRequestCommand
class	MLMEGetCommand
class	MLMEResetCommand
class	MLMERxEnableCommand
class	MLMESetCommand
class	MLMEStartCommand
class	NoArgIntParameterCommand
class	ResetProxyCommand
class	SetPLMETransmitPowerCommand

Methods in com.sun.spot.peripheral.basestation that return Object

protected Object	NoArgIntParameterCommand.readResultFrom(DataInputStream dataInputStream)
protected Object	MLMEGetCommand.readResultFrom(DataInputStream dataInputStream)
protected Object	MCPSDataRequestCommand.readResultFrom(DataInputStream dataInputStream)
protected Object	MCPSDataIndicationCommand.readResultFrom(DataInputStream dataInputStream)
protected Object	MACCommand.readResultFrom(DataInputStream dataInputStream)
Object	MACCommand.resultFrom(DataInputStream dataInputStream, ICreateExceptions exceptionCreator)
Object	ICommand.resultFrom(DataInputStream dataInputStream, ICreateExceptions exceptionCreator)

Uses of Object in com.sun.spot.peripheral.driver.proxy

Subclasses of Object in com.sun.spot.peripheral.driver.proxy

class

ProxyDriverRegistry

Uses of Object in com.sun.spot.peripheral.external

Subclasses of Object in com.sun.spot.peripheral.external

class	BoardDeviceSPI SPI implementation that hides the use of a DeviceSelector before sending SPI commands.
class	ExternalBoard Represents an external board.
class	M25P05 Driver for the M25P05 flash memory chip as fitted to Sun SPOT external boards

Uses of Object in com.sun.spot.peripheral.handler

Subclasses of Object in com.sun.spot.peripheral.handler

class	NullEventHandler
class	StopVMEventHandler

Uses of Object in com.sun.spot.peripheral.ota

Subclasses of Object in com.sun.spot.peripheral.ota

class	BoundedFlashOutputStream
class	OTACommandServer This class monitors radiogram communications on port number 8, and responds to commands received.

Uses of Object in com.sun.spot.peripheral.radio

Subclasses of Object in com.sun.spot.peripheral.radio

class	BroadcastConnectionState
class	ConnectionID
class	HeaderInfoBase HeaderInfoBase.java This class is to be extended according to the used mac layer.
class	IncomingData Structure that contains information about the data received
class	LowPan Packet processing layer based on the low pan draft.
class	LowPanHeader LowPanHeader.java
class	LowPanHeaderInfo LowPanHeaderInfo.java This class provides access to information that is stored in headers that are not existing any more after the decapsulation process that takes place in the low pan layer.
class	LowPanPacket LowPanPacket.java
class	MAC_InvalidParameterException Thrown where an invalid parameter (typically attribute identifier, PAN id or channel number) is passed to an I802_15_4_MAC
class	MACException Thrown when an I802_15_4_MAC encounters unexpected errors in received radio packet format
class	MeshRouterDaemon A daemon that keeps the radio on and ensures that this SPOT acts as a node in the mesh network
class	NoMeshLayerAckException
class	PHY_InvalidParameterException Thrown when an invalid parameter is passed to an I802_15_4_PHY
class	PHY_UnsupportedAttributeException Thrown on an attempt to use an unsupported attribute using I802_15_4_PHY.plmeSet(int, int) or I802_15_4_PHY.plmeGet(int)
class	RadioFactory Static factory for public access to the radio in various guises.
class	RadiogramProtocolManager
class	RadioOffException This exception is thrown when an attempt to write to a RadioOutputStream that implies a multi-hop send fails because the radio receiver is turned off (it fails because for a multi-hop send, the radio must receive a mesh ACK).
class	RadioPacket Represents an I802.15.4 radio packet.
class	RadioPacketDispatcher Implements IRadioPacketDispatcher for the Spot environment.
class	RadioPolicy
class	RadioPolicyManager
class	RadioProtocolManager
class	RadiostreamProtocolManager
class	ReassemblyExpiration
class	RetransmitBuffer A retransmit buffer is used by the SpotstreamProtocolManager to store data that has to be retransmitte in case that no acknowledgment arrives.
class	RetransmitTimer
class	SpotNameLookup
class	SpotSerialPipe

Methods in com.sun.spot.peripheral.radio with parameters of type Object

void	ConnectionID.copyFrom(Object o)
boolean	ConnectionID.equals(Object c)
void	LowPan.routeFound(RouteInfo info, Object uniqueKey) This method is called by the routing manager as soon as a route is available or if no route has been found within the defined period.

Uses of Object in com.sun.spot.peripheral.radio.mhrp

Subclasses of Object in com.sun.spot.peripheral.radio.mhrp

class	RouteInfo
class	SortedList

Uses of Object in com.sun.spot.peripheral.radio.mhrp.aodv

Subclasses of Object in com.sun.spot.peripheral.radio.mhrp.aodv

class	AODVManager
class	Constants
class	Receiver
class	Sender

Methods in com.sun.spot.peripheral.radio.mhrp.aodv with parameters of type Object

boolean	AODVManager.findRoute(long address, RouteEventClient eventClient, Object uniqueKey) This method triggers a new route request.
boolean	Sender.sendNewRREQ(long address, RouteEventClient eventClient, Object uniqueKey) Create an entry for the queue and put it in to the designated queue

Uses of Object in com.sun.spot.peripheral.radio.mhrp.aodv.messages

Subclasses of Object in com.sun.spot.peripheral.radio.mhrp.aodv.messages

class	AODVMessage
class	RERR
class	RREP
class	RREQ

Uses of Object in com.sun.spot.peripheral.radio.mhrp.aodv.request

Subclasses of Object in com.sun.spot.peripheral.radio.mhrp.aodv.request

class	RequestTable
class	RequestTableCleaner

Methods in com.sun.spot.peripheral.radio.mhrp.aodv.request that return Object

Object

RequestTable.removeOutstandingRequest(long destination, long originator) this method an outstanding request from the table

Methods in com.sun.spot.peripheral.radio.mhrp.aodv.request with parameters of type Object

boolean

RequestTable.addRREQ(RREQ message, RouteEventClient eventClient, Object uniqueKey) add a route request to the request table

Uses of Object in com.sun.spot.peripheral.radio.mhrp.aodv.routing

Subclasses of Object in com.sun.spot.peripheral.radio.mhrp.aodv.routing

class	RoutingEntry
class	RoutingTable
class	RoutingTableCleaner

Methods in com.sun.spot.peripheral.radio.mhrp.aodv.routing with parameters of type Object

int	RoutingEntry.compare(Object object) compares to routing entries

Uses of Object in com.sun.spot.peripheral.radio.mhrp.interfaces

Methods in com.sun.spot.peripheral.radio.mhrp.interfaces with parameters of type Object

int	Comparable.compare(Object object)
boolean	IRoutingManager.findRoute(long address, RouteEventClient eventClient, Object uniqueKey) this method triggers a new route request
void	RouteEventClient.routeFound(RouteInfo info, Object uniqueKey) callback method that can be used be the routing manager to tell the client that a route has been found

Uses of Object in com.sun.spot.peripheral.radio.policy.proxy

Subclasses of Object in com.sun.spot.peripheral.radio.policy.proxy

class

ProxyRadioPolicyManager

Uses of Object in com.sun.spot.peripheral.radio.proxy

Subclasses of Object in com.sun.spot.peripheral.radio.proxy

class	ProxyRadiogramProtocolManager
class	ProxyRadioProtocolManager
class	ProxyRadiostreamProtocolManager
class	WaitForAllAcksCommand

Uses of Object in com.sun.spot.resourcesharing

Subclasses of Object in com.sun.spot.resourcesharing

class	AdjustLockCommand
class	LockCommand
class	ProxyResourceRegistryMaster
class	RegisterCommand
class	ResourceRegistryChild
class	ResourceRegistryMaster
class	ResourceSharingException A problem has occurred during a resource sharing operation.
class	ResourceSharingScheme An enumerated type that defines the different sharing schemes for shared resources.
class	ResourceUnavailableException The resource is not currently available.
class	SimpleResource A simple implementation of the IResource interface that can be used as it is, or extended for a more complex use.
class	SimpleResourceHandle A simple implementation of IResourceHandle that can be used as is or extended.
class	UnlockAllCommand
class	UnlockCommand

Methods in com.sun.spot.resourcesharing with parameters of type Object

ReplyEnvelope	UnlockCommand.execute(Object context)
ReplyEnvelope	UnlockAllCommand.execute(Object context)
ReplyEnvelope	RegisterCommand.execute(Object context)
ReplyEnvelope	LockCommand.execute(Object context)
ReplyEnvelope	AdjustLockCommand.execute(Object context)

Uses of Object in com.sun.spot.sensorboard

Subclasses of Object in com.sun.spot.sensorboard

class	AtmegaProtoBoard beginning of the file for the AtmegaPrototyping board.
class	EDemoBoard This class manages the SPI interfaces and communications to the reachable parts on the EDemoBoard, namely the Atmega88, the Analog to Digital Converter, and the flash eeprom. ( some of this is done by superclasses ) Meant to be used in a singleton manner, this class reflects all of the functionality of the EDemoBoard to the java library space.

Uses of Object in com.sun.spot.sensorboard.hardware

Subclasses of Object in com.sun.spot.sensorboard.hardware

class	AbstractADT7411RangeInput Abstract class providing a basis for sub-classes accessing the ADT7411 a-to-d converter
class	ADT7411 Class implementing SPI access to the ADT7411 a-to-d converter.
class	ADT7411InternalTemperatureInput Sub-class of AbstractADT7411RangeInput that accesses the ADT7411 temperature sensor.
class	ADT7411RangeInput Sub-class of AbstractADT7411RangeInput that provides access to the a-to-d channels of the ADT7411 that are used for the accelerometer, the light sensor and the battery voltage sensor.
class	Atmega Simple wrapper for the Atmega part.
class	Atmega48 Simple wrapper for the Atmega48 part.
class	Atmega88 Simple wrapper for the Atmega88 part
class	AtmegaExternalBoard A spot sensorboard that has a resident atmega part The intent is that this ease the process of programming the atmega.
class	SimpleSPIControlledIOChip Abstract class for SPI IO chips.

Uses of Object in com.sun.spot.sensorboard.io

Subclasses of Object in com.sun.spot.sensorboard.io

class	BinaryScalar Class to allow using a ScalarInput as though it is an GPIO InputPin.
class	InputPin Accessor object for input only GPIO pins.
class	InvertingInputPin Class implementing single bit input with inversion of values read, i.e. low signal is returned as high and high signal is returned as low.
class	InvertingOutputPin Class implementing single bit output with inversion of values suppied by the calling code, i.e. a request to set output high sets it low and vice versa.
class	IOPin
class	IOPinException
class	OutputPin Accessor object for output only GPIO pins.
class	PinDescriptor Describe the operating parameters of a particular hardware pin.
class	ScalarInput simple concrete implementation of IScalarInput.

Uses of Object in com.sun.spot.sensorboard.peripheral

Subclasses of Object in com.sun.spot.sensorboard.peripheral

class	LEDColor Color class to be used by TriColorLED.
class	LightSensor simple extension of ScalarInput
class	LIS3L02AQAccelerometer Class to implement an accelerometer on the demo sensor board and provide access to it via the IAccelerometer3D interface.
class	Servo the basic servo, controlled via a valid SPOT IServoController.
class	Switch Class implementing simple switches, assuming a mapping of open=LOW, closed=HIGH.
class	ToneGenerator Allows attaching a simple speaker device to an output pin to generate various simple frequencies.
class	TriColorLED Provides access to the colored LEDs

Uses of Object in com.sun.spot.sensorboard.protocol

Subclasses of Object in com.sun.spot.sensorboard.protocol

class

AT91_I2C Class implementing the Inter-Integrated Circuit (I-squared-C) protocol for the AT91

Uses of Object in com.sun.spot.sensorboard.util

Subclasses of Object in com.sun.spot.sensorboard.util

class

AtmegaBootloader utility to ease programming the user space of the Atmega88 Think of this class as reflecting the capabilities of the bootloader section of the Atmega88 firmware. cause it does.

Uses of Object in com.sun.spot.testFramework

Subclasses of Object in com.sun.spot.testFramework

class	ChildIsolateTestHelper
class	ChildIsolateTestRunner
class	CopiableTestResults
class	InterIsolateTestResultLog
class	SystemOutTestResultLog
class	TestBase The abstract superclass for any class containing test cases.
class	TestRunner The TestRunner runs test cases contained in a subclass of TestBase.

Methods in com.sun.spot.testFramework with parameters of type Object

void	CopiableTestResults.copyFrom(Object o)

Uses of Object in com.sun.spot.util

Subclasses of Object in com.sun.spot.util

class	BootloaderListener Simple class to listen to the serial input over the USB connection and pass control to the bootloader.
class	CRC Standalone class to provide crc calculations.
class	Debug
class	IEEEAddress
class	MutableBoolean
class	Properties The Properties class represents a persistent set of properties.
class	Queue Implements a fully synchronised FIFO queue of Objects.
class	Utils

Methods in com.sun.spot.util that return Object

Object	Queue.get() Answer an element from the receiver.
Object	Queue.get(long timeout) Answer an element from the receiver.
Object	Properties.setProperty(String key, String value) Calls the Hashtable method put.

Methods in com.sun.spot.util with parameters of type Object

boolean	IEEEAddress.equals(Object anObject)
void	Queue.put(Object o) Add an element to the receiver.

Uses of Object in com.sun.squawk

Subclasses of Object in com.sun.squawk

class	Address The Address class is used to abstract machine addresses.
class	Isolate The Isolate class represents a "process-like" unit of computation that is isolated from other instances of Isolate.
class	Offset The offset type is used by the runtime system and collector to denote the directed distance between two machine addresses.
class	Unsafe A collection of methods for performing peek and poke operations on memory addresses.
class	UWord The word type is used by the runtime system and collector to denote machine word-sized quantities.
class	VM This is a Squawk VM specific class that is used to communicate between executing Java software and the low level core VM that is expressed in machine code.

Methods in com.sun.squawk that return Object

static Object	Unsafe.getObject(Object base, int offset) Gets a pointer from memory as an Object.
static Object	VM.shallowCopy(Object original) Perform a shallow copy of the original object, without calling a constructor
Object	Address.toObject() Casts this address to an object reference.

Methods in com.sun.squawk with parameters of type Object

static int	VM.execGraphicsIO(int op, int i1, int i2, int i3, int i4, int i5, int i6, Object send, Object receive) Executes an I/O operation on the graphics channel and return the result.
static int	VM.execIO(int op, int channel, int i1, int i2, int i3, int i4, int i5, int i6, Object send, Object receive) Executes a I/O operation that may block.
static long	VM.execIOLong(int op, int channel, int i1, int i2, int i3, int i4, int i5, int i6, Object send, Object receive) Executes an I/O operation that returns a long value.
static Address	VM.execMessageIO(int op, Object key, Object data, int status) Executes a message I/O operation.
static int	VM.execSyncIO(int context, int op, int i1, int i2, int i3, int i4, int i5, int i6, Object send, Object receive) Executes a non-blocking I/O operation whose result is guaranteed to be available immediately.
static int	VM.execSyncIO(int op, int i1, int i2, int i3, int i4, int i5, int i6, Object send, Object receive) Executes a non-blocking I/O operation whose result is guaranteed to be available immediately.
static Address	Address.fromObject(Object object) Casts an object reference to an address.
static Address	Unsafe.getAddress(Object base, int offset) Gets a pointer from memory as an Address.
static int	Unsafe.getAsByte(Object base, int offset) Gets a signed 8 bit value from memory ignoring any recorded type of the value at the designated location.
static int	Unsafe.getAsInt(Object base, int offset) Gets a signed 32 bit value from memory ignoring any recorded type of the value at the designated location.
static int	Unsafe.getAsShort(Object base, int offset) Gets a signed 16 bit value from memory ignoring any recorded type of the value at the designated location.
static UWord	Unsafe.getAsUWord(Object base, int offset) Gets a UWord value from memory ignoring any recorded type of the value at the designated location.
static int	Unsafe.getByte(Object base, int offset) Gets a signed 8 bit value from memory.
static int	Unsafe.getChar(Object base, int offset) Gets an unsigned 16 bit value from memory.
static int	Unsafe.getInt(Object base, int offset) Gets a signed 32 bit value from memory.
static long	Unsafe.getLong(Object base, int offset) Gets a 64 bit value from memory using a 64 bit word offset.
static long	Unsafe.getLongAtWord(Object base, int offset) Gets a 64 bit value from memory using a 32 bit word offset.
static Object	Unsafe.getObject(Object base, int offset) Gets a pointer from memory as an Object.
static int	Unsafe.getShort(Object base, int offset) Gets a signed 16 bit value from memory.
static UWord	Unsafe.getUWord(Object base, int offset) Gets an unsigned 32 or 64 bit value from memory.
static void	VM.printAddress(Object val) Prints an address to the VM stream.
static void	VM.printObject(Object obj) Prints the string representation of an object to the VM stream.
static void	Unsafe.setAddress(Object base, int offset, Object value) Sets a pointer value in memory without updating the write barrier.
static void	Unsafe.setByte(Object base, int offset, int value) Sets an 8 bit value in memory.
static void	Unsafe.setChar(Object base, int offset, int value) Sets an unsigned 16 bit value in memory.
static void	Unsafe.setInt(Object base, int offset, int value) Sets a 32 bit value in memory.
static void	Unsafe.setLong(Object base, int offset, long value) Sets a 64 bit value in memory.
static void	Unsafe.setLongAtWord(Object base, int offset, long value) Sets a 64 bit value in memory at a 32 bit word offset.
static void	Unsafe.setObject(Object base, int offset, Object value) Sets a pointer value in memory and updates the write barrier.
static void	Unsafe.setShort(Object base, int offset, int value) Sets a signed 16 bit value in memory.
static void	Unsafe.setUWord(Object base, int offset, UWord value) Sets a UWord value in memory.
static Object	VM.shallowCopy(Object original) Perform a shallow copy of the original object, without calling a constructor

Uses of Object in com.sun.squawk.flash

Subclasses of Object in com.sun.squawk.flash

class	MemoryHeapBlock
class	NorFlashMemoryHeap
class	NorFlashSectorState
class	NorFlashSectorStateList

Uses of Object in com.sun.squawk.imp

Subclasses of Object in com.sun.squawk.imp

class	ImpGlobal
class	MIDletMainWrapper

Uses of Object in com.sun.squawk.io

Subclasses of Object in com.sun.squawk.io

class	BufferedReader Read text from a character-input stream, buffering characters so as to provide for the efficient reading of characters, arrays, and lines.
class	BufferedWriter Write text to a character-output stream, buffering characters so as to provide for the efficient writing of single characters, arrays, and strings.
class	ConnectionBase Base class for Connection protocols.
class	MulticastOutputStream A MulticastOutputStream can be configured to send its output to zero or more named output streams.

Uses of Object in com.sun.squawk.io.j2me.radio

Subclasses of Object in com.sun.squawk.io.j2me.radio

class

Protocol Deprecated.

Uses of Object in com.sun.squawk.io.mailboxes

Subclasses of Object in com.sun.squawk.io.mailboxes

class	AddressClosedException This exception is thrown when trying to send to a closed MailboxAddress, or when reading from a Mailbox, and the MailBoxHandler is managing a private address that has closed.
class	ByteArrayEnvelope A ByteArrayEnvelope can be used to pass a byte array, or subsection of a byte array to a MailBox.
class	ByteArrayInputStreamEnvelope A ByteArrayInputStreamEnvelope can be used to pass a byte array, or subsection of a byte array, as a ByteArrayInputStream.
class	Channel A Channel is a private bidirectional link between two MailBoxes.
class	Envelope Abstract class for messages passed to MailBoxes.
class	Mailbox deprecated Use the higher-level Channel and ServerChannel classes instead.
class	MailboxAddress deprecated Use the higher-level Channel and ServerChannel classes instead.
class	MailboxClosedException This exception is thrown when trying to receive from a closed Mailbox.
class	MailboxInUseException This exception is thrown when trying to send to register a mailbox under a name, and that name is already used.
class	NoSuchMailboxException This exception is thrown when trying to send to register a mailbox under a name, and that name is already used.
class	ObjectEnvelope A ObjectEnvelope can be used to pass a copy of an ICopiable object between isolates.
class	ServerChannel Given that a Channel is a one-to-one connection between two isolates, a ServerChannel provides a factory to create new Channels by name.
class	SharedMailboxHandler

Methods in com.sun.squawk.io.mailboxes that return Object

Object	ByteArrayEnvelope.getContents() Return the contents of the envelope.
Object	ByteArrayInputStreamEnvelope.getContents() Return the contents of the envelope.
abstract Object	Envelope.getContents() Return the contents of the envelope.
Object	ObjectEnvelope.getContents() Return the contents of the envelope.

Methods in com.sun.squawk.io.mailboxes with parameters of type Object

void	ICopiable.copyFrom(Object o) Set the state of this object based on the state of object o.

Uses of Object in com.sun.squawk.peripheral

Subclasses of Object in com.sun.squawk.peripheral

class	PeripheralRegistry Place holder for all peripheral types known by Squawk.
class	SimulatedNorFlashSector I am a class that allows the RMS store to be used in Java heap as a byte array.

Uses of Object in com.sun.squawk.security

Subclasses of Object in com.sun.squawk.security

class

HexEncoding Encode / Decode hexadecimal strings to / from byte arrays

Uses of Object in com.sun.squawk.security.verifier

Subclasses of Object in com.sun.squawk.security.verifier

class	SignatureVerifier Used to verify the signature of certain signed data, including Suites.
class	SignatureVerifierException

Uses of Object in com.sun.squawk.util

Subclasses of Object in com.sun.squawk.util

class	Arrays This class contains various methods for manipulating arrays (such as sorting and searching).
class	ByteArrayInputStreamWithSetBytes An extention of ByteArrayInputStream that allows the byte array buffer to be modified, using the ByteArrayInputStreamWithSetBytes.setBytes(byte[], int, int) method.
class	IntHashtable This class implements an unsynchronized hashtable, which maps keys to values.
class	LineReader This class provides for reading lines from a reader.
class	MathUtils The class MathUtils contains some of the Java SE Math routines that are not present in the CLDC 1.1 version of Math: MathUtils.asin(double), MathUtils.acos(double), MathUtils.atan(double) & MathUtils.atan2(double, double).
class	UnexpectedException

Methods in com.sun.squawk.util that return Object

static Object[]	Arrays.copy(Object[] src, int srcPos, Object[] dest, int destPos, int length) Make a new Object array and initialize its contents from the contents of a specified Object array.
Object	IntHashtable.get(int key) Returns the value to which the specified key is mapped in this hashtable.
Object	IntHashtable.put(int key, Object value) Maps the specified key to the specified value in this hashtable.
Object	IntHashtable.remove(int key) Removes the key (and its corresponding value) from this hashtable.

Methods in com.sun.squawk.util with parameters of type Object

static int	Arrays.binarySearch(Object[] a, Object key, Comparer c) Searches the specified array for the specified object using the binary search algorithm.
static int	Arrays.binarySearch(Object[] a, Object key, Comparer c) Searches the specified array for the specified object using the binary search algorithm.
int	Comparer.compare(Object a, Object b) Compares its two arguments for order.
boolean	IntHashtable.contains(Object value) Tests if some key maps into the specified value in this hashtable.
static Object[]	Arrays.copy(Object[] src, int srcPos, Object[] dest, int destPos, int length) Make a new Object array and initialize its contents from the contents of a specified Object array.
static Object[]	Arrays.copy(Object[] src, int srcPos, Object[] dest, int destPos, int length) Make a new Object array and initialize its contents from the contents of a specified Object array.
static boolean	Arrays.equals(Object[] a, Object[] a2) Returns true if the two specified arrays of Objects are equal to one another.
static boolean	Arrays.equals(Object[] a, Object[] a2) Returns true if the two specified arrays of Objects are equal to one another.
static boolean	Arrays.equals(Object a, Object b) Returns true if the two specified Objects are equal to one another.
static void	Arrays.fill(Object[] a, int fromIndex, int toIndex, Object val) Assigns the specified Object reference to each element of the specified range of the specified array of Objects.
static void	Arrays.fill(Object[] a, int fromIndex, int toIndex, Object val) Assigns the specified Object reference to each element of the specified range of the specified array of Objects.
static void	Arrays.fill(Object[] a, Object val) Assigns the specified Object reference to each element of the specified array of Objects.
static void	Arrays.fill(Object[] a, Object val) Assigns the specified Object reference to each element of the specified array of Objects.
static int	Arrays.hashCode(Object object) Returns a hashcode for a given object.
static int	Arrays.length(Object array) Returns the length of the specified array object, as an int.
Object	IntHashtable.put(int key, Object value) Maps the specified key to the specified value in this hashtable.
static void	Arrays.sort(Object[] a, Comparer c) Sorts the specified array of objects according to the order induced by the specified Comparer.
static void	Arrays.sort(Object[] a, int fromIndex, int toIndex, Comparer c) Sorts the specified range of the specified array of objects according to the order induced by the specified Comparer.
void	IntHashtableVisitor.visitIntHashtable(int key, Object value) Visit method.

Uses of Object in com.sun.squawk.vm

Subclasses of Object in com.sun.squawk.vm

class

ChannelConstants

Uses of Object in java.io

Subclasses of Object in java.io

class	ByteArrayInputStream A ByteArrayInputStream contains an internal buffer that contains bytes that may be read from the stream.
class	ByteArrayOutputStream This class implements an output stream in which the data is written into a byte array.
class	DataInputStream A data input stream lets an application read primitive Java data types from an underlying input stream in a machine-independent way.
class	DataOutputStream A data input stream lets an application write primitive Java data types to an output stream in a portable way.
class	EOFException Signals that an end of file or end of stream has been reached unexpectedly during input.
class	InputStream This abstract class is the superclass of all classes representing an input stream of bytes.
class	InputStreamReader An InputStreamReader is a bridge from byte streams to character streams: It reads bytes and translates them into characters.
class	InterruptedIOException Signals that an I/O operation has been interrupted.
class	IOException Signals that an I/O exception of some sort has occurred.
class	OutputStream This abstract class is the superclass of all classes representing an output stream of bytes.
class	OutputStreamWriter An OutputStreamWriter is a bridge from character streams to byte streams: Characters written to it are translated into bytes.
class	PrintStream A PrintStream adds functionality to another output stream, namely the ability to print representations of various data values conveniently.
class	Reader Abstract class for reading character streams.
class	UnsupportedEncodingException The Character Encoding is not supported.
class	UTFDataFormatException Signals that a malformed UTF-8 string has been read in a data input stream or by any class that implements the data input interface.
class	Writer Abstract class for writing to character streams.

Fields in java.io declared as Object

protected Object	Reader.lock The object used to synchronize operations on this stream.
protected Object	Writer.lock The object used to synchronize operations on this stream.

Methods in java.io with parameters of type Object

void	PrintStream.print(Object obj) Print an object.
void	PrintStream.println(Object x) Print an Object and then terminate the line.

Constructors in java.io with parameters of type Object

Reader(Object lock)
Create a new character-stream reader whose critical sections will synchronize on the given object.

Writer(Object lock)
Create a new character-stream writer whose critical sections will synchronize on the given object.

Uses of Object in java.lang

Subclasses of Object in java.lang

class	ArithmeticException Thrown when an exceptional arithmetic condition has occurred.
class	ArrayIndexOutOfBoundsException Thrown to indicate that an array has been accessed with an illegal index.
class	ArrayStoreException Thrown to indicate that an attempt has been made to store the wrong type of object into an array of objects.
class	Boolean The Boolean class wraps a value of the primitive type boolean in an object.
class	Byte The Byte class is the standard wrapper for byte values.
class	Character The Character class wraps a value of the primitive type char in an object.
class	Class Instances of the class Class represent classes and interfaces in a running Java application.
class	ClassCastException Thrown to indicate that the code has attempted to cast an object to a subclass of which it is not an instance.
class	ClassNotFoundException Thrown when an application tries to load in a class through its string name using the forName method in class Class but no definition for the class with the specified name could be found.
class	Double The Double class provides an object wrapper for Double data values and serves as a place for double-oriented operations.
class	Error An Error is a subclass of Throwable that indicates serious problems that a reasonable application should not try to catch.
class	Exception The class Exception and its subclasses are a form of Throwable that indicates conditions that a reasonable application might want to catch.
class	Float The Float class provides an object wrapper for Float data values, and serves as a place for float-oriented operations.
class	IllegalAccessException Thrown when an application tries to load in a class, but the currently executing method does not have access to the definition of the specified class, because the class is not public and in another package.
class	IllegalArgumentException Thrown to indicate that a method has been passed an illegal or inappropriate argument.
class	IllegalMonitorStateException Thrown to indicate that a thread has attempted to wait on an object's monitor or to notify other threads waiting on an object's monitor without owning the specified monitor.
class	IllegalStateException Signals that a method has been invoked at an illegal or inappropriate time.
class	IllegalThreadStateException Thrown to indicate that a thread is not in an appropriate state for the requested operation.
class	IndexOutOfBoundsException Thrown to indicate that an index of some sort (such as to an array, to a string, or to a vector) is out of range.
class	InstantiationException Thrown when an application tries to create an instance of a class using the newInstance method in class Class, but the specified class object cannot be instantiated because it is an interface or is an abstract class.
class	Integer The Integer class wraps a value of the primitive type int in an object.
class	InterruptedException Thrown when a thread is waiting, sleeping, or otherwise paused for a long time and another thread interrupts it using the interrupt method in class Thread.
class	Long The Long class wraps a value of the primitive type long in an object.
class	Math The class Math contains methods for performing basic numeric operations.
class	NegativeArraySizeException Thrown if an application tries to create an array with negative size.
class	NoClassDefFoundError Thrown if the Java Virtual Machine or a classloader tries to load in the definition of a class (as part of a normal method call or as part of creating a new instance using the new expression) and no definition of the class could be found.
class	NullPointerException Thrown when an application attempts to use null in a case where an object is required.
class	NumberFormatException Thrown to indicate that the application has attempted to convert a string to one of the numeric types, but that the string does not have the appropriate format.
class	OutOfMemoryError Thrown when the Java Virtual Machine cannot allocate an object because it is out of memory, and no more memory could be made available by the garbage collector.
class	Runtime Every Java application has a single instance of class Runtime that allows the application to interface with the environment in which the application is running.
class	RuntimeException RuntimeException is the superclass of those exceptions that can be thrown during the normal operation of the Java Virtual Machine.
class	SecurityException Thrown by the security manager to indicate a security violation.
class	Short The Short class is the standard wrapper for short values.
class	String The String class represents character strings.
class	StringBuffer A string buffer implements a mutable sequence of characters.
class	StringIndexOutOfBoundsException Thrown by the charAt method in class String and by other String methods to indicate that an index is either negative or greater than or equal to the size of the string.
class	System The System class contains several useful class fields and methods.
class	Thread A thread is a thread of execution in a program.
class	Throwable The Throwable class is the superclass of all errors and exceptions in the Java language.
class	VirtualMachineError Thrown to indicate that the Java Virtual Machine is broken or has run out of resources necessary for it to continue operating.

Methods in java.lang that return Object

Object

Class.newInstance() Creates a new instance of a class.

Methods in java.lang with parameters of type Object

StringBuffer	StringBuffer.append(Object obj) Appends the string representation of the Object argument to this string buffer.
static void	System.arraycopy(Object src, int srcPos, Object dst, int dstPos, int length) Copies an array from the specified source array, beginning at the specified position, to the specified position of the destination array.
boolean	Boolean.equals(Object obj) Returns true if and only if the argument is not null and is a Boolean object that represents the same boolean value as this object.
boolean	Byte.equals(Object obj) Compares this object to the specified object.
boolean	Character.equals(Object obj) Compares this object against the specified object.
boolean	Double.equals(Object obj) Compares this object against the specified object.
boolean	Float.equals(Object obj) Compares this object against some other object.
boolean	Integer.equals(Object obj) Compares this object to the specified object.
boolean	Long.equals(Object obj) Compares this object against the specified object.
boolean	Object.equals(Object obj) Indicates whether some other object is "equal to" this one.
boolean	Short.equals(Object obj) Compares this object to the specified object.
boolean	String.equals(Object anObject) Compares this string to the specified object.
static int	System.identityHashCode(Object x) Returns the same hashcode for the given object as would be returned by the default method hashCode(), whether or not the given object's class overrides hashCode().
StringBuffer	StringBuffer.insert(int offset, Object obj) Inserts the string representation of the Object argument into this string buffer.
boolean	Class.isInstance(Object obj) Determines if the specified Object is assignment-compatible with the object represented by this Class.
static String	String.valueOf(Object obj) Returns the string representation of the Object argument.

Uses of Object in java.lang.ref

Subclasses of Object in java.lang.ref

class	Reference Abstract base class for reference objects.
class	WeakReference This class provides support for weak references.

Methods in java.lang.ref that return Object

Object

Reference.get() Returns this reference object's referent.

Constructors in java.lang.ref with parameters of type Object

WeakReference(Object ref)
Creates a new weak reference that refers to the given object.

Uses of Object in java.util

Subclasses of Object in java.util

class	Calendar Calendar is an abstract base class for converting between a Date object and a set of integer fields such as YEAR, MONTH, DAY, HOUR, and so on.
class	Date The class Date represents a specific instant in time, with millisecond precision.
class	EmptyStackException Thrown by methods in the Stack class to indicate that the stack is empty.
class	Hashtable This class implements a hashtable, which maps keys to values.
class	NoSuchElementException Thrown by the nextElement method of an Enumeration to indicate that there are no more elements in the enumeration.
class	Random An instance of this class is used to generate a stream of pseudorandom numbers.
class	Stack The Stack class represents a last-in-first-out (LIFO) stack of objects.
class	Timer A facility for threads to schedule tasks for future execution in a background thread.
class	TimerTask A task that can be scheduled for one-time or repeated execution by a Timer.
class	TimeZone TimeZone represents a time zone offset, and also figures out daylight savings.
class	Vector The Vector class implements a growable array of objects.

Fields in java.util declared as Object

protected Object[]

Vector.elementData The array buffer into which the components of the vector are stored.

Methods in java.util that return Object

Object	Vector.elementAt(int index) Returns the component at the specified index.
Object	Vector.firstElement() Returns the first component of this vector.
Object	Hashtable.get(Object key) Returns the value to which the specified key is mapped in this hashtable.
Object	Vector.lastElement() Returns the last component of the vector.
Object	Enumeration.nextElement() Returns the next element of this enumeration if this enumeration object has at least one more element to provide.
Object	Stack.peek() Looks at the object at the top of this stack without removing it from the stack.
Object	Stack.pop() Removes the object at the top of this stack and returns that object as the value of this function.
Object	Stack.push(Object item) Pushes an item onto the top of this stack.
Object	Hashtable.put(Object key, Object value) Maps the specified key to the specified value in this hashtable.
Object	Hashtable.remove(Object key) Removes the key (and its corresponding value) from this hashtable.

Methods in java.util with parameters of type Object

void	Vector.addElement(Object obj) Adds the specified component to the end of this vector, increasing its size by one.
boolean	Calendar.after(Object when) Compares the time field records.
boolean	Calendar.before(Object when) Compares the time field records.
boolean	Hashtable.contains(Object value) Tests if some key maps into the specified value in this hashtable.
boolean	Vector.contains(Object elem) Tests if the specified object is a component in this vector.
boolean	Hashtable.containsKey(Object key) Tests if the specified object is a key in this hashtable.
void	Vector.copyInto(Object[] anArray) Copies the components of this vector into the specified array.
boolean	Calendar.equals(Object obj) Compares this calendar to the specified object.
boolean	Date.equals(Object obj) Compares two dates for equality.
Object	Hashtable.get(Object key) Returns the value to which the specified key is mapped in this hashtable.
int	Vector.indexOf(Object elem) Searches for the first occurence of the given argument, testing for equality using the equals method.
int	Vector.indexOf(Object elem, int index) Searches for the first occurence of the given argument, beginning the search at index, and testing for equality using the equals method.
void	Vector.insertElementAt(Object obj, int index) Inserts the specified object as a component in this vector at the specified index.
int	Vector.lastIndexOf(Object elem) Returns the index of the last occurrence of the specified object in this vector.
int	Vector.lastIndexOf(Object elem, int index) Searches backwards for the specified object, starting from the specified index, and returns an index to it.
Object	Stack.push(Object item) Pushes an item onto the top of this stack.
Object	Hashtable.put(Object key, Object value) Maps the specified key to the specified value in this hashtable.
Object	Hashtable.remove(Object key) Removes the key (and its corresponding value) from this hashtable.
boolean	Vector.removeElement(Object obj) Removes the first occurrence of the argument from this vector.
int	Stack.search(Object o) Returns the 1-based position where an object is on this stack.
void	Vector.setElementAt(Object obj, int index) Sets the component at the specified index of this vector to be the specified object.

Uses of Object in javax.microedition.io

Subclasses of Object in javax.microedition.io

class	ConnectionNotFoundException This class is used to signal that a connection target cannot be found.
class	Connector This class is a placeholder for the static methods that are used for creating all the Connection objects.

Uses of Object in javax.microedition.midlet

Subclasses of Object in javax.microedition.midlet

class	MIDlet A MIDLet is a MID Profile application.
class	MIDletStateChangeException Signals that a requested MIDlet state change failed.

Uses of Object in javax.microedition.rms

Subclasses of Object in javax.microedition.rms

class	InvalidRecordIDException
class	RecordStore A class representing a record store.
class	RecordStoreException
class	RecordStoreFullException Thrown to indicate an operation could not be completed because the record store system storage is full.
class	RecordStoreNotFoundException Thrown to indicate an operation could not be completed because the record store could not be found.
class	RecordStoreNotOpenException

Uses of Object in junit.framework

Subclasses of Object in junit.framework

class	Assert A set of assert methods.
class	AssertionFailedError Thrown when an assertion failed.
class	ComparisonFailure Thrown when an assert equals for Strings failed.

Methods in junit.framework with parameters of type Object

static void	Assert.assertEquals(Object expected, Object actual) Asserts that two objects are equal.
static void	Assert.assertEquals(String message, Object expected, Object actual) Asserts that two objects are equal.
static void	Assert.assertNotNull(Object object) Asserts that an object isn't null.
static void	Assert.assertNotNull(String message, Object object) Asserts that an object isn't null.
static void	Assert.assertNotSame(Object expected, Object actual) Asserts that two objects refer to the same object.
static void	Assert.assertNotSame(String message, Object expected, Object actual) Asserts that two objects refer to the same object.
static void	Assert.assertNull(Object object) Asserts that an object is null.
static void	Assert.assertNull(String message, Object object) Asserts that an object is null.
static void	Assert.assertSame(Object expected, Object actual) Asserts that two objects refer to the same object.
static void	Assert.assertSame(String message, Object expected, Object actual) Asserts that two objects refer to the same object.